Flat Of 3 Winding Machines Peculiar Production

(SRM.3DS.03 + KD)

Physicall Properties Width Length Hight Net Weight : 54 cm : 102 cm : 130 cm : 87 kg

Enlarge

1. Each bobbin spindle has a separate motor and it works independly with 1355 r.p.m. Each motor has a power 0,12 kW adjusted with 220 or 380 V AC, 50 Hz electricity.
2. The speed of the yarn guide drum on each spindle will be 1500, 2350 and 3150 r.p.m.by adjusting the belt between two hoops; so that the yarn will be winded as 450-490 m.p.m. in low speed, 630-670 m.p.m. in middle speed and 780-820 m.p.m. in high speed according to the yarn thickness.
3. Plastic cone-heading may be changed, to be adjusted for 4.20, 5.20, 5.20 sharp, 5.20 half and 5.57 cone-endings.
4. In case of yarn broken or finished, the bobbin will automatically stop.
5. If the yarn bobbin is full or reached to required weight, it will stop automatically by means of a mechanical crowbar.
6. The shears on the waxing apparatus with accessories can be adjusted mechanically according to yarn thickness.
7. Yarn is waxed mechanically in direction of the movement of the yarn. The waxing apparatus with accessories has twice revolving cylinder for waxing.
8. Each motor has an electronic circuit system for smooth winding.
9. Each spindle has a 6" drum. That is why the traverse length in each yarn bobbin will be almost 6 inches.
10. The small physicall faults in the yarn is under control by means of chenille yarn quality control instrument; if the fault appears the yarn will be broken by automatic shears and the motor will stop. The data of the trouble shooting is entered by means of the potans on chenille yarn quality control instrument.

Important Note: The winding machine winds almost every polyester yarn but certainly not pure one.